
Hot Tub Leaking? How to Find It, and What You Can Fix
How to tell a hot tub leak from evaporation, find it with the power off, deal with a loose union, and what each maker's warranty lets you touch yourself.
Topic
Almost every pool problem is a plumbing problem wearing a costume. These guides make the loop readable.
12 guides on this topic

How to tell a hot tub leak from evaporation, find it with the power off, deal with a loose union, and what each maker's warranty lets you touch yourself.

Water out the waste line, at the valve, the tank seam or a fitting: each points to one part. The makers' fixes, and when to rebuild or replace the valve.

Pool filter gauge reading high? Check it against your clean baseline, clean the filter, then find what cleaning missed, from the makers' own manuals.

How inline and offline tablet chlorinators work, where they go in the plumbing, what the dial means, and the two mistakes that ruin heaters or start fires.

A puff after recharging is normal. Powder that keeps coming is often too much DE, not a torn grid. What the makers say, where it gets in, and the fix.

A cracked lateral is the usual answer, but not the only one. How to tell filter sand from plaster grit, what the makers' troubleshooting says, and the fix.

Bubbles blowing from the jets mean air is being drawn in before the pump. Here's the order to check, from a free fix to the expensive one.

A shop vac, a compressor and which one the manuals allow. Line order, how much pressure is too much, and why antifreeze is the backup rather than the plan.

High pressure and low pressure mean opposite things. Here's how to read your gauge and find the restriction, from the makers' own troubleshooting tables.

The circulation loop from skimmer to return, why suction and pressure leaks look nothing alike, and the equipment order that protects your heater.

What a pool valve actuator does, how its cams decide where the valve stops, and how to tell a dead actuator from a dead relay or a stiff valve.

What every valve on a pool does, which handle position means what, and the one move that destroys a multiport valve — plus how to spot one failing.