Pentair · System:3
Pentair Sta-Rite System:3 Modular Media
Sta-Rite's two-cartridge System:3 filter: four sizes in two tanks, the flow rating that falls behind the area, and why the cartridge pack beats buying two.

The System:3 Modular Media is Sta-Rite's cartridge filter, sold by Pentair, which owns the Sta-Rite name. Pentair calls its elements modules rather than cartridges: two of them, a large outer one and a smaller inner one that sits inside it. Like any cartridge filter, it has no backwash. You open the tank and hose the elements.
Its D.E. sibling, the System:3 Modular D.E., shares the smaller tank, and the System:3 sand filter comes in the same two tank sizes. Sand, cartridge or D.E. covers how the three types compare.
Four sizes, two tanks
- S7M120: 300 square feet, up to 100 gallons a minute
- S7M400: 400 square feet, up to 115
- S8M150: 450 square feet, up to 124
- S8M500: 500 square feet, up to 130
The S7M models use a 21-inch tank with 7 clamps. The S8M models use a 25-inch tank with 8. The flow ratings follow NSF's figures per square foot, and those fall as the filter grows: 0.333 gallons a minute per square foot on the S7M120, down to 0.26 on the S8M500. So two-thirds more area than the S7M120 buys only 30 more gallons a minute of rating. What the area buys is dirt capacity. Pentair's brochure claims the 450 sq. ft. filter holds 50 lb of dirt or more and the 300 sq. ft. one 35 lb or more, against 18 lb or less for other media filters. That's the maker's own comparison. Filter sizing covers matching the area to your pump.
The 21-inch tank is the D.E. filter's tank. Its upper and lower halves, its cord ring, its clamps and its clamp bolts carry the same part numbers as the System:3 Modular D.E.'s. Pentair says the modular tanks let you change filter media without changing the tank, and it lists a modular media conversion kit for the 21-inch tank, 25021-0021, and a modular D.E. conversion kit, 23910-1100S, on the D.E. filter's parts page. Neither document spells out the conversion itself, so ask a dealer before buying either.
Buy the cartridge pack
The two elements are sold separately or as an inner and outer pack, and the pack is far cheaper. At 2025-2026 US list:
- S7M120: pack 170145 at $859.28, against $1,291.08 bought separately
- S7M400: pack 170146 at $1,188.62, against $1,654.49
- S8M150: pack 170147 at $1,396.29, against $1,880.15
- S8M500: pack 170148 at $1,836.98, against $2,067.33
That's a saving of $430 to $484 on the first three, and $230 on the S8M500. Pentair counts cartridge elements as consumables, covered for one year.
Cleaning it
Clean when the gauge reads 10 psi above the starting pressure. Don't fit a backwash or selector valve: the manual says the filter can't be backwashed and none should be used.
Pentair's only English manual for the SM Series is written for the S8M600, a 600 sq. ft. model not in today's range. It's the manual Pentair links from the SM Series page, so its procedures are the ones Pentair gives. Its sizes and part numbers aren't the four current models'; the catalog pages are where those come from.
Its cleaning steps, done in the tank:
- Stop the pump, open the air release valve, close the inlet and return valves, and drain the tank through its plug.
- Loosen the clamps alternately, on opposite sides of the tank, and lift the top half off without damaging the cord ring.
- Hose as much dirt as you can off both elements while they're still in the tank, and let it drain.
- Lift the inner element out and hose it thoroughly.
- Hose the outer element's inner and outer pleats in place. If it's still dirty, let it drain, lift it out and wash it again.
- Put both back, reassemble, and restart.
They're heavy. The manual warns the elements are too heavy to lift safely when wet and dirty, and says to drain them as far as possible in the tank and have two people lift. If hosing doesn't shift oils and scale, soak them in a filter cleaner. The manual says to soak them at every cleaning if the filter serves a spa. On a pool sanitized with PHMB, use only PHMB cleaners, or the warranty is void. The filter cleaning guide covers the soak.
A new or freshly cleaned element can pass some fine material until it builds up a coat. The manual calls that normal.
Startup, clamps and the cord ring
At startup, open the air release valve on top, start the pump, and close the valve when a steady stream of water comes out. Then write down the gauge reading. Never go above 50 psi.
The clamps go on hand-tight, in the crisscross order the manual draws. Don't work your way around from one clamp to the next. Don't lubricate the cord ring: the manual says lubricant can make it swell.
Installing it
The manual wants the filter less than 3 feet above the pool's water level, as close to the pool as possible, and protected from the weather. Use thread seal tape or a plastic-safe sealant on PVC, never pipe joint compound, which can crack the plastic. Either plug the side drain fitting with a 2-inch NPT plug or pipe it to waste.
A check valve between the filter and a heater stops hot water backing up into the filter. The manual says elements damaged by heat aren't covered.
Winter
Letting the filter freeze can damage it and voids the warranty. Pull both drain plugs, loosen the unions on the inlet and outlet and leave them loose all winter, and drain all the piping. Then take the elements out and store them somewhere warm and dry.
Where you buy it
Pentair sells all four sizes only through dealers, and all four are on its TradeGrade list. From a store, builder or service company and professionally installed, the filter gets two years, parts and labor. Without a professional install, or bought online, it's one year, parts only.
Which model do you have?
The model number is on the filter label. Everything else in the range is shared — these are the parts that change with it.
| Model | Area | Max flow | Outer | Inner | Pack |
|---|---|---|---|---|---|
| S7M120 | 300 sq. ft. | 100 GPM | 25022-0201S | 25021-0200S | 170145 |
Note on S7M120: The 21 in. tank, with 7 clamps: the same shells, cord ring and clamps as the System:3 D.E. filter. The outer cartridge is 200 sq. ft., the inner 100. | |||||
| S7M400 | 400 sq. ft. | 115 GPM | 25022-0224S | 25021-0223S | 170146 |
Note on S7M400: The 21 in. tank, with 7 clamps. The outer cartridge is 264 sq. ft., the inner 136. | |||||
| S8M150 | 450 sq. ft. | 124 GPM | 25022-0203S | 25021-0202S | 170147 |
Note on S8M150: The 25 in. tank, with 8 clamps. The outer cartridge is 259 sq. ft., the inner 191. | |||||
| S8M500 | 500 sq. ft. | 130 GPM | 25022-0225S | 25021-0224S | 170148 |
Note on S8M500: The 25 in. tank, with 8 clamps. The outer cartridge is 291 sq. ft., the inner 209. | |||||
Pentair Sta-Rite System:3 Modular Media parts, and what goes wrong
Read off the manufacturer’s parts list and checked before it ships. Open a row for what a bad one actually does — or start from the symptom and work down, which is the cheaper order.
What is it doing?
Both elements for the S7M120 in one pack, at $859.28 US list, against $1,291.08 for the outer and inner bought separately. The packs for the other sizes are 170146, 170147 and 170148; each saves $430 to $484 on the separate prices, except the S8M500's, which saves $230. Hose and soak them before you replace them: the manual's answer to deposits a hose won't move is a filter cleaner soak. Pentair counts cartridge elements as consumables, covered for one year.
The seal between the tank halves on the S7M120 and S7M400, and the same part as the System:3 D.E. filter's tank o-ring. Take it off slowly so it doesn't stretch or tear, and replace it if it's cut or nicked. Clean both halves' seats. Don't lubricate it: Pentair's manual says lubricant can make it swell. The 25 in. tank takes 24850-0009 at $110.24. $96.60 US list.
The Posi-Lok clamps that hold the tank halves together: seven on the 21 in. tank, eight on the 25 in. Fit them all, then tighten the knobs hand-tight in the crisscross order the manual draws, never working round from one clamp to the next, and loosen them alternately on opposite sides. Never touch them with the filter under pressure. $196.50 US list each, with its bolt, 24850-0010Z, at $47.59.
The screen on the internal air bleed tube, 25021-0003Z at $14.71. Pentair's manual says both have to be in place before the filter runs, and to clean the air bleed periodically. $23.10 US list.
The air release valve, the 2 in. gauge and the fittings between them, as one part. At startup, open the valve, start the pump and close it when a steady stream of water comes out, then write down the gauge reading: the filter wants cleaning 10 psi above it. The manual says to replace a gauge that fails. $150.44 US list; the gauge alone is 33600-0023T at $72.10.
If you are doing the job anyway
Opening the tank to hose the cartridges puts the cord ring in your hand. Numbers carry the Z the 2025-2026 catalog prints; the 2016 sheet leaves it off.
Cartridge change
The pack is far cheaper than the two cartridges bought apart, and the cord ring comes off every time the tank opens.
- Inner and outer cartridge pack, S7M120170145
- Cord ring, the 21 in. tank's seal24850-0008Z
Air bleed
Both have to be in place before the filter runs, and the screen is the part that clogs.
- Air bleed filterWC8-126Z
- 25021-0003Z25021-0003Z
Pentair Sta-Rite System:3 Modular Media manuals and documentation
Hosted by the manufacturer. These open on Pentair’s own servers, so they stay current.
- System:3 modular media filter owner's manual, written for the S8M600 (P/N S293S Rev. C, 2023): the manual Pentair links for the SM Seriesmanual
- System:3 SM Series product page: the four models, dealer onlyspec
- System:3 Mod Media filters brochurespec
- Pentair Pool 2025-2026 product catalog, cartridge filters: the SM Series on pages 56 and 57, with the dimensionsspec
- Pentair Pool 2025-2026 product catalog, filter parts: the SM Series on page 338, with US list pricesdiagram
- SM Series replacement parts, the older catalog page (PDF 2016)diagram
- Pentair TradeGrade SKU list (policy effective October 1, 2019)spec
- Pentair pool and spa equipment warranty informationspec
Pentair Sta-Rite System:3 Modular Media warranty
2 years parts, Included when bought from a dealer and professionally installed labor
Two years. Pentair's warranty table gives every filter that term, for one bought from a store, builder or service company and professionally installed. Without a professional install it's one year, parts only, and anything bought online, including from an authorized online reseller, gets one year of parts only from the date of purchase. All four sizes are on Pentair's TradeGrade list, sold only through stores, builders and service companies. Cartridge elements, o-rings and gaskets are consumables, covered for one year. Pentair's manual adds that letting the filter freeze, or damaging the elements with heat from a heater, voids the warranty.
Manufacturer’s termsPentair Sta-Rite System:3 Modular Media complete parts list
Every part on the manufacturer’s exploded diagram, in their numbering. Marked rows are the ones covered above with a symptom and a diagnosis.
49 parts
| No. | Part | Description | Note |
|---|---|---|---|
| 1 | 33600-0023T | Gauge, 2 in. | $72.10 US list |
| 2 | 154689Z | Air release valve | $45.64 US list. The S8M600 manual prints WC212-120P |
| 3 | 35202-0959 | Nipple | $21.10 US list |
| 4 | 24900-0504Z | Adapter bushing | $28.09 US list |
| 5 | 35505-1423Z | O-ring | $3.22 US list |
| 6 | 25022-0201S | Large (outer) cartridge, S7M120 | 200 sq. ft. $858.87 US list |
| 6 | 25022-0224S | Large (outer) cartridge, S7M400 | 264 sq. ft. $1,175.47 US list |
| 6 | 25022-0203S | Large (outer) cartridge, S8M150 | 259 sq. ft. $1,164.44 US list |
| 6 | 25022-0225S | Large (outer) cartridge, S8M500 | 291 sq. ft. $1,202.97 US list |
| 7 | 25021-0200S | Small (inner) cartridge, S7M120 | 100 sq. ft. $432.21 US list |
| 7 | 25021-0223S | Small (inner) cartridge, S7M400 | 136 sq. ft. $479.02 US list |
| 7 | 25021-0202S | Small (inner) cartridge, S8M150 | 191 sq. ft. $715.71 US list |
| 7 | 25021-0224S | Small (inner) cartridge, S8M500 | 209 sq. ft. $864.36 US list |
| 8 | WC8-126Z | Air bleed filter what goes wrong | $23.10 US list |
| 9 | 25021-0003Z | Air bleed tube | $14.71 US list |
| 10 | 25021-0101Z | Baffle and bulkhead fitting | $107.18 US list |
| 11 | 35505-1428Z | O-ring | $9.33 US list |
| 12 | 35505-1429Z | O-ring | $4.33 US list |
| 13 | 25021-0100Z | Elbow and bulkhead assembly | $159.65 US list |
| 14 | 35505-1425Z | O-ring | $24.90 US list |
| 15 | 35505-1424Z | O-ring | $14.92 US list |
| 16 | 24900-0509Z | Adapter fitting | $43.18 US list |
| 17 | 27001-0022Z | Plug, 1½ in. NPT | $4.45 US list |
| 18 | 24900-0503Z | Drain plug | $42.97 US list |
| 19 | 24752-0050Z | Bulkhead retaining nut | $37.12 US list |
| 20 | 24850-0200Z | Clamp assembly what goes wrong | Seven on the 21 in. tank, eight on the 25 in. $196.50 US list |
| 21 | 24850-0010Z | Clamp bolt | Seven or eight. $47.59 US list |
| 22 | 24850-0102S | Lower tank half, 21 in. | $1,680.92 US list. The System:3 D.E. filter's lower shell too |
| 22 | 24851-0103S | Lower tank half, 25 in. | $1,899.20 US list |
| 23 | 24850-0008Z | Cord ring, 21 in. what goes wrong | $96.60 US list. The System:3 D.E. filter's tank o-ring too |
| 23 | 24850-0009 | Cord ring, 25 in. | $110.24 US list |
| 24 | 24851-9000 | Upper tank half kit, 21 in. | Includes all decals and labels. $1,505.28 US list. The System:3 D.E. filter's upper shell too |
| 24 | 24851-9001 | Upper tank half kit, 25 in. | Includes all decals and labels. $1,851.53 US list |
| 25 | 24850-0105 | Valve and gauge assembly what goes wrong | Items 1 to 5. $150.44 US list |
| 26 | 170145 | Inner and outer cartridge pack, S7M120 what goes wrong | $859.28 US list |
| 26 | 170146 | Inner and outer cartridge pack, S7M400 | $1,188.62 US list |
| 26 | 170147 | Inner and outer cartridge pack, S8M150 | $1,396.29 US list |
| 26 | 170148 | Inner and outer cartridge pack, S8M500 | $1,836.98 US list |
| — | 24850-0016Z | Clamp retaining ring | $10.84 US list |
| — | PKG 188Z | Union kit, 2 in. slip, a pair | $48.66 US list. The 2016 sheet prints PKG 188 |
| — | PKG 189 | Union kit, 2 in. FPT, a pair | The catalog's SM accessories |
| — | 77703-0100 | Union by 1½ in. FPT adapter, a pair | The catalog's SM accessories |
| — | 77703-0101 | Union by 1½ in. slip adapter, a pair | The catalog's SM accessories |
| — | U9-362Z | O-ring, union | $4.33 US list |
| — | U11-200PS | Union collar, 2 in. | The 2016 sheet |
| — | U11-196PS | Union adapter, 2 in. slip | The 2016 sheet |
| — | U212-252DS | Brass deluxe air bleed, optional | The 2016 sheet |
| — | 25021-0021 | Modular media conversion kit, S7M120 and S7M400 | Items 10 to 14 and 19, per the 2016 sheet; the cartridges are bought separately |
| — | 25021-0025 | Modular media conversion kit, S8M150 and S8M500 | The catalog's SM accessories; the cartridges are bought separately |