Hayward · Super II
Hayward Super II
Every Super II in Hayward's parts table, why none of them can be made for the US since 2021, and the five parts it shares with the Super Pump.
Discontinued. The manufacturer has discontinued it. Everything on this page still applies to the units already installed.

The Super II is Hayward's self-priming pump for in-ground pools with big filters, heaters and cleaners. Its 2013 manual sells it on a 180 cubic inch basket, a see-through strainer cover that threads on by hand with no clamp, and a motor and drive that come out on six bolts without touching the plumbing.
Hayward's product photo shows a different lid: clear, and held down by two knobs. The manual's parts list doesn't include that lid. If yours has the knobs, check the cover and o-ring numbers with a dealer before ordering them.
None of these models can be made for the US any more
Hayward's guide to the DOE pump rules, effective July 19, 2021, names 15 Super II models, from 0.75 HP to 3.0 HP. Every one is on the non-compliant side. The DOE standard covers pumps made on or after that date, so the Super II on your pad was built before then.
That's a harder cut than the Super Pump took. Its models up to 1.0 HP made Hayward's compliant list, and the Super II's smallest didn't. The guide notes that its list may change.
So this page is for keeping a Super II running. If you're replacing one, start from Hayward's compliant list. Above 1.1 total horsepower, almost everything on it is in what Hayward calls its ultra-high efficiency group, which includes the TriStar VS.
How to read the model number
The model number tells you the motor, and the motor decides most of the parts.
- The X number is the max-rate horsepower. On Hayward's DOE list, X7 is 0.75 HP, X10 is 1.0, X15 is 1.5, X20 is 2.0, X25 is 2.5 and X30 is 3.0.
- EE models are rated full-rate. Hayward's wiring table puts each max-rate size beside a smaller full-rate one: 1 HP max-rate on the same line as 3/4 HP full-rate, 1.5 with 1, 2 with 1.5, 2.5 with 2, and 3 with 2.5.
- A 2 after the X number means two speeds. SP3015X202 is the two-speed 2 HP. Hayward says to use high speed for starting, vacuuming, spa jets and a dirty pool, and low speed for ordinary filtering. It self-primes on high speed only.
- Motor numbers end in M or B. Hayward's footnote says max-rated motors carry an M and full-rated ones a B, so match the letter as well as the number.
The wiring table gives 115 V for motors up to 2 HP max-rate. The 2.5 and 3 HP max-rate motors are 230 V only.
Five parts change with the model
Only the housing, motor, impeller, diffuser and wear ring change between models, and the fitment table has each one. Two patterns are worth knowing:
- The diffuser and wear ring come in two sizes. SPX3000BN and SPX3005R fit the models up to 1.5 HP, except SP3010(X15)51. SPX3021B and SPX3021R fit that one and the 2 HP models and up.
- The 51 models run one impeller size up. SP3007(X10)51 takes the 1.5 HP models' impeller, SP3010(X15)51 the 2 HP models', and so on, each with its own motor. The manual doesn't say what 51 marks.
Everything else in the 2013 manual is shared by every Super II: the strainer cover and its o-ring, basket, drain plugs, diffuser gasket, seal assembly, housing gasket, seal plate, motor mounting plate, slinger, screws and mounting bracket.
Five of those carry Super Pump numbers too: the seal assembly (SPX1600Z2), diffuser gasket (SPX1600R), drain plug (SPX1700FG), slinger (SPX0125F) and housing cap screw (SPX1600Z4). The larger wear ring, SPX3021R, is also the TriStar VS's impeller ring.
Priming, pressure and restarting
It self-primes to 10 feet, and it can take up to five minutes. If it hasn't primed in five, Hayward says to stop the motor and find out why. A two-speed model primes on high speed only.
Wait five seconds before restarting it. Hayward says restarting sooner can spin the motor backward and seriously damage the pump.
Lubricate the cover o-ring every time. Hayward names Jack's 327, and says to tighten the cover by hand only.
Never run or test it above 50 psi. A pressure test is a job for a professional, at 40 psi at most, with the water no warmer than 100°F, for no longer than 24 hours.
For a pump that won't prime, Hayward's check is suction. There should be 5 to 6 inches of vacuum at the strainer cover, which your pool dealer can measure with a gauge. With the skimmer full and the pump running, you can feel for suction at the skimmer's bottom port with the basket out.
The seal job
Hayward's seal change takes the motor assembly out on its six housing cap screws, leaving the plumbing in place. In short:
- Pull the diffuser off the seal plate to reach the impeller.
- Take off the motor's end cover, and hold the motor shaft still with a 7/16 in. open-end wrench on the flats between the capacitor and the centrifugal switch. Some motors need a larger wrench in the slot at the end of the shaft.
- Unscrew the impeller counterclockwise, and take off the spring seal and the impeller ring.
- Take off the seal plate, and press the old ceramic seat out of it.
- Clean everything, and lubricate the impeller hub and the seal recess with a dilute, non-granulated liquid soap.
- Fit the new spring seal with its black polished face away from the impeller, and press the ceramic seat in with its polished side out.
- Screw the impeller back on clockwise. Put the ring back with its flange toward the diffuser, then refit the diffuser and the motor assembly.
The manual's noisy-pump list explains why the seal matters beyond the puddle. A leaking seal lets chlorinated water into the motor bearings, which lose their grease and start to whine. Hayward's fix is to replace any leaking seal at once. Pool pump leaking water covers finding where the drip starts.
Which model do you have?
The model number is on the pump label. Everything else in the range is shared — these are the parts that change with it.
| Model | HP | SKU | Housing | Motor | Impeller | Diffuser | Wear ring |
|---|---|---|---|---|---|---|---|
| SP3005(X7)(AZ) | 0.75 | SP3005X7AZ | SPX3100AAZ | SPX1605Z1(B)(M) | SPX3005C | SPX3000BN | SPX3005R |
Note on SP3005(X7)(AZ): 0.75 HP max-rate on Hayward's 2021 DOE list. | |||||||
| SP3007(X10)(AZ) | 1.0 | SP3007X10AZ | SPX3100AAZ | SPX1607Z1(B)(M) | SPX3007C | SPX3000BN | SPX3005R |
Note on SP3007(X10)(AZ): 1.0 HP max-rate on the DOE list, which also has SP3007X10AZ2, marked as the 2-inch version. | |||||||
| SP3007(X10)EE(AZ) | — | — | SPX3120AAZ | SPX1607Z1(B)(M)E | SPX3007C | SPX3000BN | SPX3005R |
Note on SP3007(X10)EE(AZ): The DOE list's SP3007EECA is a 0.75 HP full-rate. | |||||||
| SP3007(X10)51 | — | — | SPX3100AAZ | SPX0135Z1C(B)(M) | SPX3010C | SPX3000BN | SPX3005R |
Note on SP3007(X10)51: The manual doesn't say what the 51 suffix marks. This row takes the 1.5 HP models' impeller and its own motor. | |||||||
| SP3010(X15)(AZ) | 1.5 | SP3010X15AZ | SPX3120AAZ | SPX1610Z1(B)(M) | SPX3010C | SPX3000BN | SPX3005R |
Note on SP3010(X15)(AZ): 1.5 HP max-rate on the DOE list. | |||||||
| SP3010X152(AZ)(S) | 1.5 | SP3010X152AZ | SPX3120AAZ | SPX1610Z2M(S) | SPX3010C | SPX3000BN | SPX3005R |
Note on SP3010X152(AZ)(S): Two-speed, 1.5 HP max-rate. | |||||||
| SP3010(X15)EE(AZ) | — | — | SPX3120AAZ | SPX1610Z1(B)(M)E | SPX3010C | SPX3000BN | SPX3005R |
Note on SP3010(X15)EE(AZ): The DOE list's SP3010EEAZ is a 1.0 HP full-rate. | |||||||
| SP3010(X15)51 | — | — | SPX3120AAZ | SPX0140Z1(B)(M)C | SPX3016C | SPX3021B | SPX3021R |
Note on SP3010(X15)51: Takes the 2 HP models' impeller, the larger diffuser and wear ring, and its own motor. | |||||||
| SP3015(X20)(EE)(AZ) | 2.0 | SP3015X20AZ | SPX3120AAZ | SPX1615Z1(B)(M)E | SPX3016C | SPX3021B | SPX3021R |
Note on SP3015(X20)(EE)(AZ): 2.0 HP max-rate on the DOE list. Its SP3015EEAZ is a 1.5 HP full-rate. | |||||||
| SP3015X202(AZ)(S) | 2.0 | SP3015X202AZ | SPX3120AAZ | SPX1615Z2M(S) | SPX3016C | SPX3021B | SPX3021R |
Note on SP3015X202(AZ)(S): Two-speed, 2.0 HP max-rate. | |||||||
| SP3015(X20)51 | — | — | SPX3120AAZ | SPX0150Z1C(B)(M) | SPX3021C | SPX3021B | SPX3021R |
Note on SP3015(X20)51: Takes the 2.5 HP models' impeller and its own motor. | |||||||
| SP3020(X25)(EE)(AZ) | 2.5 | SP3020X25AZ | SPX3120AAZ | SPX1620Z1(B)(M) | SPX3021C | SPX3021B | SPX3021R |
Note on SP3020(X25)(EE)(AZ): 2.5 HP max-rate on the DOE list. Its SP3020EEAZ is a 2.0 HP full-rate. | |||||||
| SP3020X252(AZ)(S) | 2.5 | SP3020X252AZ | SPX3120AAZ | SPX1620Z2M(S) | SPX3021C | SPX3021B | SPX3021R |
Note on SP3020X252(AZ)(S): Two-speed, 2.5 HP max-rate. | |||||||
| SP3025(X30)(EE)(AZ) | 3.0 | SP3025X30AZ | SPX3120AAZ | SPX1625Z1(B)(M) | SPX3026C | SPX3021B | SPX3021R |
Note on SP3025(X30)(EE)(AZ): 3.0 HP max-rate on the DOE list, which calls SP3025EEAZ a 3.0 HP full-rate too. | |||||||
| SP3025(X30)G51 | — | — | SPX3120AAZ | SPX0160Z1CG | SPX3031C | SPX3021B | SPX3021R |
Note on SP3025(X30)G51: Its own motor and the largest impeller. | |||||||
| SP303053(AZ) | — | — | SPX3120AAZ | SPX0160Z1(B)(M)E | SPX3031C | SPX3021B | SPX3021R |
Note on SP303053(AZ): The manual gives no description, and the 2021 DOE list doesn't name it. | |||||||
| SP303063(AZ) | — | — | SPX3120AAZ | SPX0160Z1D | SPX3026C | SPX3021B | SPX3021R |
Note on SP303063(AZ): The manual gives no description, and the 2021 DOE list doesn't name it. | |||||||
Hayward Super II parts, and what goes wrong
Read off the manufacturer’s parts list and checked before it ships. Open a row for what a bad one actually does — or start from the symptom and work down, which is the cheaper order.
What is it doing?
Hayward's first check for a pump that won't prime is the strainer housing: fill it with water, and make sure the cover o-ring is clean, seated in its groove and lubricated with Jack's 327. Then lock the cover firmly in place. The manual says to clean and lubricate the o-ring every time the cover comes off, and to tighten the cover by hand only, never with a wrench. SPX3000S is the o-ring for the manual's threaded cover. Hayward's product photo shows a lid held by two knobs, which the manual doesn't list, so confirm the number with a dealer if yours has them.
A strainer or skimmer basket loaded with debris is on Hayward's list for a pump that won't prime, and a clogged strainer is its first cause of low flow. Clean it regularly, and don't knock it against anything to empty it, as the manual warns. It holds 180 cubic inches, and every Super II takes the same basket.
Hayward ties bearing noise to the seal. A leaking seal lets chlorinated water seep into the bearings and wash out the grease, and the bearings start to whine. Its fix is to replace any seal leak at once. The seal is two parts, a spring seal on the impeller hub and a ceramic seat in the seal plate. Both faces scratch easily, so handle them by the edges. Every Super II takes this seal, and so does the Super Pump.
Hayward's chart gives an impeller jammed with debris for a motor that hums without starting, and has a professional open the pump to clear it. For low flow from a plugged or damaged impeller, the fix is a new impeller and a new seal assembly together. The number depends on the model, from SPX3005C on the smallest to SPX3031C. SPX3010C fits the 1.5 HP models, and the fitment table has the rest.
The last step of Hayward's seal change is to make sure the housing gasket is in place, and replace it if it's damaged. Fasten the motor assembly back with the six 3/8 in. x 2 in. housing cap screws, tightened alternately and evenly. Take care not to disturb the diffuser gasket, SPX1600R, while sliding the motor assembly in.
To store the pump for winter, the manual has you turn off the power, drain the water below the pool's inlets, take out both drain plugs and the strainer cover, and disconnect the pump. Then refit the cover and plugs and keep it somewhere dry. Hayward says freezing voids the warranty, to use only propylene glycol as antifreeze, and never to purge the system with compressed air. A blower under 5 psi is the limit. The Super Pump uses the same plug.
Hayward Super II manuals and documentation
Hosted by the manufacturer. These open on Hayward’s own servers, so they stay current.
Hayward Super II warranty
One year, in the 2013 manual
The 2013 manual gives one year from the date of purchase, in single-family residential use. It excludes freezing, negligence, improper installation and improper use or care, and Hayward says it won't pay for removal, repair or installation labor or for shipping. Without proof of purchase, the manufacturing date counts as the purchase date. The manual also says that running the pump dry, adding undiluted chemicals in front of the pump's suction, letting it freeze, or installing it other than as the manual says voids the warranty. Hayward's terms have changed since 2013. Its 2026 Expert Line terms are on the Super Pump page.
Manufacturer’s termsHayward Super II complete parts list
Every part number the manufacturer lists for this equipment, from its own documents. Marked rows are the ones covered above with a symptom and a diagnosis.
44 parts
| Part | Description | Note |
|---|---|---|
| SPX3100D | Strainer cover | All models in the 2013 manual: the threaded Easy-Thread cover |
| SPX3000S | Strainer cover o-ring what goes wrong | All models |
| SPX3000M | Basket what goes wrong | All models |
| SPX3100AAZ | Pump/strainer housing | SP3005(X7)(AZ), SP3007(X10)(AZ) and SP3007(X10)51 |
| SPX3120AAZ | Pump/strainer housing | Every other model |
| SPX1700FG | Drain plug with gasket what goes wrong | 2 required. All models |
| SPX1600R | Diffuser gasket | All models |
| SPX3000BN | Diffuser | SP3005 to SP3010 models, except SP3010(X15)51 |
| SPX3021B | Diffuser | SP3010(X15)51 and every larger model |
| SPX3005R | Impeller ring (wear ring) | With diffuser SPX3000BN |
| SPX3021R | Impeller ring (wear ring) | With diffuser SPX3021B |
| SPX3005C | Impeller | SP3005(X7)(AZ) |
| SPX3007C | Impeller | SP3007(X10)(AZ) and SP3007(X10)EE(AZ) |
| SPX3010C | Impeller what goes wrong | SP3007(X10)51 and the SP3010 models except SP3010(X15)51 |
| SPX3016C | Impeller | SP3010(X15)51, SP3015(X20)(EE)(AZ) and SP3015X202(AZ)(S) |
| SPX3021C | Impeller | SP3015(X20)51 and the SP3020 models |
| SPX3026C | Impeller | SP3025(X30)(EE)(AZ) and SP303063(AZ) |
| SPX3031C | Impeller | SP3025(X30)G51 and SP303053(AZ) |
| SPX1600Z2 | Seal assembly what goes wrong | Two-part shaft seal. All models |
| SPX3000T | Housing gasket what goes wrong | All models |
| SPX3020E | Seal plate | All models |
| SPX1600Z4 | Housing cap screw, 3/8 in. x 2 in. | 6 required. All models |
| SPX3000F | Motor mounting plate | All models |
| SPX0125Z4 | Motor cap screw | All models |
| SPX0125F | Slinger | All models |
| SPX3000Q | Mounting adapter | All models |
| SPX3000GA | Mounting bracket with adapter and screws | All models |
| SPX1605Z1(B)(M) | Motor | SP3005(X7)(AZ). Hayward: max-rated motors end in M, full-rated in B |
| SPX1607Z1(B)(M) | Motor | SP3007(X10)(AZ) |
| SPX1607Z1(B)(M)E | Motor | SP3007(X10)EE(AZ) |
| SPX0135Z1C(B)(M) | Motor | SP3007(X10)51 |
| SPX1610Z1(B)(M) | Motor | SP3010(X15)(AZ) |
| SPX1610Z2M(S) | Motor, two-speed | SP3010X152(AZ)(S) |
| SPX1610Z1(B)(M)E | Motor | SP3010(X15)EE(AZ) |
| SPX0140Z1(B)(M)C | Motor | SP3010(X15)51 |
| SPX1615Z1(B)(M)E | Motor | SP3015(X20)(EE)(AZ) |
| SPX1615Z2M(S) | Motor, two-speed | SP3015X202(AZ)(S) |
| SPX0150Z1C(B)(M) | Motor | SP3015(X20)51 |
| SPX1620Z1(B)(M) | Motor | SP3020(X25)(EE)(AZ) |
| SPX1620Z2M(S) | Motor, two-speed | SP3020X252(AZ)(S) |
| SPX1625Z1(B)(M) | Motor | SP3025(X30)(EE)(AZ) |
| SPX0160Z1CG | Motor | SP3025(X30)G51 |
| SPX0160Z1(B)(M)E | Motor | SP303053(AZ) |
| SPX0160Z1D | Motor | SP303063(AZ) |